Herewith the example of command sequence in TEMS 6.1.4
Voice Call CS
i.e “120/15” means 120 second on call then call end, 15 second wait and then call again.
1. Loop Start give the number of repetition for command below the loop start (General -> Loop Start)
2. Dial select the MS and give the destination number (Voice -> Dial)
4. Wait 120 wait 120s on call (General -> Wait)
5. End Call (Voice -> End Call)
6. Wait 15 wait 15 before call again (General -> Wait)
7. Loop End (General -> Loop End)
Video Call CS
In general cs for video call is same as voice call, but in video call in dial command we must add “v”.
i.e
Loop Start
Dial v081384760975
Wait 120
End Call
Wait 15
Loop End
i.e “120/15” means 120 second on call then call end, 15 second wait and then call again.
1. Loop Start give the number of repetition for command below the loop start (General -> Loop Start)
2. Dial select the MS and give the destination number (Voice -> Dial)
3. Synchronize to synchcronize MS before go to the next command (General -> Synchronize)
5. End Call (Voice -> End Call)
6. Wait 15 wait 15 before call again (General -> Wait)
7. Loop End (General -> Loop End)
Video Call CS
In general cs for video call is same as voice call, but in video call in dial command we must add “v”.
i.e
Loop Start
Dial v081384760975
Wait 120
End Call
Wait 15
Loop End
No comments:
Post a Comment