Tuesday 28 June 2016
Monday 27 June 2016
1.
Optimization
Questions
a) How
you can optimize a new network.
b) Basic
parameters you notice in optimization (Both TEMS & NPI).
c) Which
tool you use for network optimization and some properties of tool used.
d) Drive
test parameters Rx lev, Rx Qual, SQI, C/I, FER, BER and values for all the
parameters (best and worst).
e) Rx
Qual relation to BER.
f) Rx
Qual difference with SQI.
g) Channel
in RF stands for which value of frequency.
h) Factors
associated with worst Rx Qual in the network.
i)
Call drop reasons.
j)
How to improve C/I and value for hopping and
Non-hopping networks.
k) How
to improve voice crackling problem in the network.
l)
How you give tilt to the antenna in the network.
m) How
to measure the tower height.
n) How
you overcome with the problem of over-shooting of the Cells.
o) Which
type of antenna you decide for city coverage, capacity and for town and Highways?
p) How
many BCCH scanned by the MS in the neighbor list.
q) Post
processing tool used for Drive Test.
2.
Anteena Based Questions
Anteena Based Questions
a) Antenna
Pattern.
b) Isotropic
Antenna.
c) Antenna
Beam width.
d) Polarization
used in antenna.
e) Vertical
and Horizontal polarization.
f) X-Pol
Antenna.
g) Antenna
Gain.
h) How
you decide Antenna height.
i)
Effect of antenna tilt on antenna pattern.
j)
Which type of tilt is better Mechanical or
Electrical?
k) Use
of TMA and TMB with antenna.
l)
VSWR and value for that.
3. Planning
Questions and other general questions
a) How
to plan a fresh network.
b) Max
Cell radius for 900/1800 band.
c) Frequency
Planning.
d) Hopping
type.
e) Which
type of hopping is best Synthesizer/Baseband?
f) Coverage
planning/ Capacity planning.
g) Call
Flow (MTC/MOC).
h) HO
Call Flow.
i)
HO based on Rx Qual, Rx Lev, Power Budget, TA
Based.
j)
Handover Algorithm.
k) Hysteresis
Offset given in Cell Reselection.
l)
Function of penalty counter in HO.
m) Adaptive
power control used in network.
n) Authentication Process.
o) KPI
Parameters
Monday 13 June 2016
Azurreo
RF Drive Test Engineer - United Arab Emirates (UAE).
Primary Responsabilities
Responsibilities include, but not limited to:
Perform Radio Signaling Test, CDF and Localization Test, Customer Acceptance Test for both Operator and Trade Markets & Internal Customer Acceptance/Pre Customer Acceptance Test on 2G/3G/HSPA/TD-SCDMA/LTE mobile terminals.
Perform the testing activities in network operators & vendor laboratories if needed.
Preliminary log analysis for failure test cases cases.
Collect, analyze and compile FT results and log files and deliver these to project teams and Error Data Base.
Raise issues with accurate description, issues retest, ad-hoc issues retest in the correct environment and deliver accurate feedback to the project for the same.
Providing the feedback on test strategy, test scope for the test products. Also from Trade Market and operator’s market’s point of view.
Create and deliver the reports for the performed work on daily and weekly basis.
Collect and create Local Market Information and deliver this info to Team leader.
Establish a good relationship with members in the FT team as well as with external staff.
Education
Masters or Bachelor's degree in Computer Science, Electrical Engineer or equivalent experience.
Technical skills
The requirements listed below are representative of the knowledge, skill, and/or ability required:
More than 3 years of working experience in a Telecommunication company, most specifically in the field test experience in mobile phone industry.
Candidate should be from Mobile Testing (Protocol and Application Testing) background on 2G/WCDMA/LTE technologies
